AI-assisted inspections: the AI fills in the form, a person makes the call
A lot of an inspection round is writing down serial numbers. GearReg hands that part to the AI and leaves the judgement with your inspector.
What the AI does
- Reads the labelSerial number, manufacturer, model and manufacture date.
- Recognises your gearA serial already on your register is matched, so a re-inspection skips the model photo.
- Suggests the typeIt picks from your own categories. When it is not sure, it offers two or three choices for the inspector to pick from.
- Sorts the registerIt says whether an item looks like height safety gear or lifting gear.
- Points out possible defectsAnything it sees in the photos is listed for the inspector to check by hand.
What it never does
- Pass or fail gearA person presses the button, with the checklist in front of them.
- Certify anythingThe record names the inspector who made the decision, not the AI.
- Overrule the inspectorEvery field it fills in can be corrected. The record shows whether details came from the AI, were edited, or were typed in.
What gets recorded
Each inspection keeps the photos, what the AI suggested, what the inspector confirmed or changed, who inspected it and when. If the question ever comes up, the record shows who decided what.
The AI can be wrong
Labels are worn, photos are dark and serial numbers are stamped into curved steel. Inspectors should read the details back against the item before they continue. If the AI cannot be reached, the same inspection can be entered by hand.
It knows your gear
The AI is given the makes and models already confirmed on your own register, so it favours the gear your company owns and spells it the way you do.
Each company's register is separate. One company's gear, photos and users are never visible to another. See the rigging register, the height safety equipment register and the sample reports.