GearReg

A height safety equipment register, kept apart from lifting gear

Harnesses, lanyards, lifelines and connectors, inspected by phone and kept apart from lifting gear. Gear past its service life cannot be passed, whatever its condition.

Never for lifting again

Some gear can do either job: a sling, a shackle, a pulley. Once it has been used for height safety, it should stay there.

  • One tick on siteThe inspector ticks Height safety only. The item moves to the height safety register.
  • Labelled on every screenIt shows as Height safety only, not for lifting, in the app, on Find item and in every report.
  • Hard to undoAnyone can tick it. Only an administrator can untick it.
  • Its own intervalInspect height safety gear on a different interval from rigging gear if you need to.

Harness and lanyard service life, built in

Each category has a service life. The app reads the manufacture date from the label, and an item past its life cannot pass. These are the starting values; set your own from the manufacturer's instructions.

CategoryStarting service lifeChecklist
Full body harness10 years9 checks
Fall arrest lanyard10 years8 checks
Pole strap / work positioning lanyard10 years8 checks
Energy absorber10 years7 checks
Self-retracting lifeline (SRL)Judged on condition8 checks
Kernmantle rope / static line10 years6 checks
Rope grab / fall arresterJudged on condition7 checks
Karabiner / connectorJudged on condition7 checks
Anchor strap / webbing sling10 years7 checks
Descender / ascender / rope deviceJudged on condition7 checks
Safety helmet10 years6 checks

A tag anyone can read

The app tells the inspector which tag to fit, and shows the whole crew which tag is current.

Use quarterly colours, calendar quarters, six-monthly periods, or a dated tag. Before any inspection is saved, an administrator confirms the tag rules in plain words, and again after any change.

The GearReg tag colour guide, listing red, green, blue and yellow tags with their months and marking the current one.

Try it on your own gear

GearReg is free at the start of the roll-out. Start with one crew's harness bags and see what is out of date. The same account holds your rigging register.