How it works: the AI fills in the form, a person makes the call
A lot of an inspection round is writing down serial numbers. GearReg is AI-assisted: it hands that part to the AI and leaves the judgement with your competent person. The steps are the same in the rigging and height safety register, the test and tag register and the calibration register.
Five steps, in every register
Scan the QR tag
If taggedA new tag adds the item to the register. A known tag brings up the item, and you still take the item and serial photos to confirm it is the right gear.
Photo of the item
The whole item, so the record shows what it looked like.
Photo of the serial
The AI reads the serial number from the label.
Photo of the model or rating plate
The AI reads the make, model and dates, and suggests a category.
Certificate
If availableUpload the certificate or test results, if you have them. A PDF or a photo is fine.
A competent person decides pass or fail. The AI reads labels and fills in the form; it never makes the decision.
No GearReg tags yet? Scan the QR tags already on your gear (any QR code works), or an administrator can print a sheet of tags from the app. GearReg printed QR tags will be on sale after the trial.
What the AI does
- Reads the labelSerial number, manufacturer, model and manufacture date.
- Recognises your gearA serial already on your register is matched to the item.
- Suggests the typeIt picks from your own categories. When it is not sure, it offers two or three choices for the person to pick from.
- Suggests height safetyOn rigging gear, it says whether an item looks like height safety gear or lifting gear. A person confirms.
- Points out possible defectsAnything it sees in the photos is listed for the person to check by hand.
What it never does
- Pass or fail gearA person presses the button, with the checklist in front of them.
- Inspect, test or calibrateA competent person inspects, a licensed or competent tester tests, and your lab calibrates.
- Certify anythingThe record names the person who made the decision, not the AI.
- Overrule the personEvery field it fills in can be corrected. The record shows whether details came from the AI, were edited, or were typed in.
What gets recorded
Each record keeps the photos, what the AI suggested, what the person confirmed or changed, who decided and when. If the question ever comes up, the record shows who decided what.
The AI can be wrong
Labels are worn, photos are dark and serial numbers are stamped into curved steel. Read the details back against the item before you continue. If the AI cannot be reached, the same record can be entered by hand.
How it works: questions
- Does the AI pass or fail gear?
- No. A competent person presses pass or fail, with the checklist in front of them. The AI reads labels and fills in the form.
- Does the AI inspect, test or certify anything?
- No. The AI does not inspect, test or certify. The record names the person who made the decision, not the AI.
- What if the AI reads a label wrongly?
- Every field it fills in can be corrected, and the record shows whether details came from the AI, were edited, or were typed in. If the AI cannot be reached, the details can be entered by hand.
- Are my photos shared with other companies?
- No. Each company's register is separate. Photos are sent to our AI provider only to read the label.
It knows your gear
The AI is given the makes and models already confirmed on your own register, so it favours the gear your company owns and spells it the way you do.
Each company's register is separate. One company's gear, photos and users are never visible to another. See the rigging and height safety register, test and tag register and calibration register, and the sample reports.