GearReg Test and Tag

Test and tag register for electrical equipment

Record each test from a phone: photos, readings and the instrument used, in the same register as your tag dates. Leads, power tools, RCDs and generators, ready to hand to the site.

How an item goes on the register

Scan the tag, take three photos and attach the test results. The AI reads the rating plate and suggests a category. The licensed or competent tester makes the pass or fail call.

  1. Scan the QR tag

    If tagged

    A new tag adds the item to the register. A known tag brings up the item, and you still take the item and serial photos to confirm it is the right gear.

  2. Photo of the item

    The whole item, so the record shows what it looked like.

  3. Photo of the serial

    The AI reads the serial number from the label.

  4. Photo of the rating plate

    The AI reads the make, model and dates, and suggests a category.

  5. Test results

    If available

    Upload the test results, if you have them, and record the readings and the test instrument used.

A competent person decides pass or fail. The AI reads labels and fills in the form; it never makes the decision.

No GearReg tags yet? Scan the QR tags already on your gear (any QR code works), or an administrator can print a sheet of tags from the app. GearReg printed QR tags will be on sale after the trial.

Equipment the test and tag register is set up for

Each type of equipment asks for the readings that apply to it.

CategoryReadings recordedThe first visual checks
Extension lead / flexible cordEarth continuity, Insulation resistance, Polarity correctPlug, socket and cord free of cracks, burns or damage. Outer sheath not cut, abraded, twisted or squashed; no inner cores showing.
Power tool, Class I (earthed)Earth continuity, Insulation resistancePlug, socket and cord free of cracks, burns or damage. Outer sheath not cut, abraded, twisted or squashed; no inner cores showing.
Power tool, Class II (double insulated)Insulation resistancePlug, socket and cord free of cracks, burns or damage. Outer sheath not cut, abraded, twisted or squashed; no inner cores showing.
Power board (no RCD)Earth continuity, Insulation resistance, Polarity correctPlug, socket and cord free of cracks, burns or damage. Outer sheath not cut, abraded, twisted or squashed; no inner cores showing.
Portable RCD / RCD power boardEarth continuity, Insulation resistance, Polarity correct, RCD trip time at rated currentPlug, socket and cord free of cracks, burns or damage. Outer sheath not cut, abraded, twisted or squashed; no inner cores showing.
Generator / portable outlet deviceEarth continuity, Insulation resistance, RCD trip time at rated currentHousing, outlets and controls undamaged. RCD protection fitted and test button trips.
Other electrical equipmentEarth continuity, Insulation resistancePlug, socket and cord free of cracks, burns or damage. Outer sheath not cut, abraded, twisted or squashed; no inner cores showing.

These are the categories every new company starts with. Rename them, add your own and edit any checklist.

The tester decides

GearReg does not test anything and does not pass or fail anything. The tester does the test with their own instrument, and GearReg keeps the result, the readings and the photos.

The AI reads labels and suggests a category. What the AI does and does not do.

  • Readings, not just a tickEarth continuity, insulation resistance, RCD trip time and polarity, as each category needs them.
  • Guide limitsThe app shows the usual Australian limits as a guide. A reading outside a guide limit asks the tester to confirm, and the record notes it.
  • Visual checks on screenPlug, socket and cord, sheath, cord anchorage, and no unapproved joins or tape.
  • Out of serviceFailed items go on the out of service register with the reason and a photo.

Readings and the instrument, with every test

Each test keeps the readings, the test instrument used, the photos and the person who made the call.

  • Construction site rules to startAustralian and New Zealand companies start on three-monthly colour tags, with a 12-monthly option for lower-risk workplaces. Your administrator confirms the rules before anyone can test.
  • Project rulesA head contractor can set its own test and tag rules for a site, separate from its rigging rules.
  • Its own registerTest and tag is its own register under the same company login, so a rigger never sees the electrical gear unless you give them access.

Test and tag reports

PDF, Excel and CSV exports with your logo, with the readings and the test instrument for each item.

  • Three reportsThe equipment register, the test history and the out of service register.
  • Readings includedEach test row carries the readings and the instrument used.

Sample coming. A sample test and tag export made with demo data will be added here. Until then, see the rigging and height safety samples for the layout.

Test and tag register: questions

Does GearReg do the testing?
No. A licensed or competent tester does the test with their own instrument. GearReg records the result, the readings and the photos.
Does the AI decide if an item passes?
No. It reads the labels and suggests a category. The tester decides.
Can I upload results from my test instrument?
Yes, as a file or a photo on the item's record.
Is it separate from my rigging register?
Yes. Test and tag is its own register under the same company login, so a rigger never sees the electrical gear unless you give them access.
What does it cost?
Free during the trial. Pricing will be published before anything is charged.